Gibson
-
Gibson pickup 498T Modern Classic 4-Conductor – CH PU498TDBCC4
Una versione ad output elevato del 490T, l’humbucker™ 498T di Gibson combina la risposta più potente di un magnete Alnico 5 con avvolgimenti aggiuntivi bilanciati su ciascuna bobina, per porre l’accento sulle frequenze medio-alte del pickup ottenendo un suono più crunch e con maggiore sustain. Perfetto per l’hard rock, il 498T satura facilmente gli amplificatori per un output robusto e rovente, che aumenta la potenza e la presenza di qualsiasi chitarra.
Anche i poli magnetici del 498T sono allineati un po’ più distanti per adattarsi alla spaziatura delle corde al ponte, che è diversa dalla spaziatura delle corde al manico. Questo aiuta a produrre lead potenti e ritmiche corpose senza sacrificare la definizione di ogni singola nota. Il 498T è dotato di cablaggio schermato a quattro conduttori per il funzionamento in serie, parallelo o splittato ed è completamente cerato per eliminare qualsiasi rischio di feedback microfonico.
119,00 € -
GIBSON PTTP-060 HISTORIC LIGHTWEIGHT TAILPIECE – NICKEL
GIBSON PTTP-060 HISTORIC LIGHTWEIGHT TAILPIECE – NICKEL
120,00 € -
-
-
129,00 €
-
129,00 €
GIBSON MINI HUMBUCKER RHYTHM – GOLD
129,00 € -
Gibson pickup 490R ”Modern Classic” (Rhythm,Double Black, Chrome cover, 4-conductor, Potted, Alnico II)
As rock music developed and grew in popularity, amplifiers became larger and featured higher wattage, and the music became louder and more powerful sounding as a result. This led to a call for a more versatile pickup that could split coils through a push/pull knob and prevent microphonic feedback from occurring when the volume was turned up to maximum levels. Gibson answered this call with the introduction of the revolutionary 490T and 490R pickups (”T” for treble and ”R” for rhythm), which have the traditional characteristics of the original Patent Applied For pickups, but with two key modifications. First, a four-conductor wiring scheme allows the 490s to be connected to any push/pull knob, which lets players split the coils and increase versatility. Gibson also introduced wax potting, which does away with any air space, minimizing microphonic feedback. The 490R is a humbucker with the tonal characteristics of an original Patent Applied For, with a slight increase in upper midrange response. The 490T bridge pickup is calibrated to match the 490R, with pole pieces aligned a little further apart to accommodate the spacing of the strings at the bridge, which is different than the spacing of the strings at the neck.
129,00 € -
Gibson pickup 498T Modern Classic 4-Conductor – GH PU498TDBGC4
As rock music developed and grew in popularity, amplifiers became larger and featured higher wattage, and the music became louder and more powerful sounding as a result. This led to a call for a more versatile pickup that could split coils through a push/pull knob and prevent microphonic feedback from occurring when the volume was turned up to maximum levels. Gibson answered this call with the introduction of the revolutionary 490T and 490R pickups (”T” for treble and ”R” for rhythm), which have the traditional characteristics of the original Patent Applied For pickups, but with two key modifications. First, a four-conductor wiring scheme allows the 490s to be connected to any push/pull knob, which lets players split the coils and increase versatility. Gibson also introduced wax potting, which does away with any air space, minimizing microphonic feedback. The 490R is a humbucker with the tonal characteristics of an original Patent Applied For, with a slight increase in upper midrange response. The 490T bridge pickup is calibrated to match the 490R, with pole pieces aligned a little further apart to accommodate the spacing of the strings at the bridge, which is different than the spacing of the strings at the neck.
129,00 € -
Gibson pickup P-90 Soapbar (Cream cover, 2-conductor, Potted, Alnico V)
First introduced in the early 1950s, Gibson’s legendary P-90 single coil pickup produced a raw powerful tone that helped define the blues and rock and roll in their formative years. Today, the P-90’s traditional combination of high output and brilliant tone is still considered a favorite among many top musicians. Known by the familiar nickname, the ”Soapbar,” the P-90 still cuts through any type of music, all while displaying amazing tonal sensitivity for everything from blues and rock to mellow jazz riffs. It’s perfect as a vintage replacement and features vintage, braided two-conductor wiring. It’s also fully wax potted to eliminate any chance of unwanted microphonic feedback.
129,00 € -
Gibson pickup 57 Classic Plus IM57P-NH
Per i primi anni della loro produzione, i famosi humbuckers Gibson ”Patent Applied For” furono avvolti con macchine imprecise, con conseguente produzione di pickup con uscita e timbro leggermente diversi. Questi sono stati – e restano oggi – molto desiderabili per i musicisti che vogliono combinare ed esplorare una gamma completa di possibilità tonali. Il ’57 Classic Humbucker Vintage Style è il risultato dello sforzo di Gibson di catturare e ricreare questa caratteristica rinomata. Introdotto nel 1992, il Classic ’57 fornisce un suono caldo e pieno con una risposta equilibrata, con quel classico crunch del Gibson humbucker PAF. Sono fatti con le esatte specifiche dei PAFS originali, tra cui magneti Alnico II, espansioni polari nichelate, distanziali in acero, e conduttori intrecciati vintage-style. I pickup sono riempiti di cera per rimuovere tutta laria interna e ogni possibilità di feedback microfonico.
139,00 € -
-
140,00 €
PREMIUM PLAYING STOOL STD LOGO TALL
140,00 € -
Gibson pickup 57 Classic IM57R4P-NZ
Per i primi anni della loro produzione, i famosi humbuckers Gibson ”Patent Applied For” furono avvolti con macchine imprecise, con conseguente produzione di pickup con uscita e timbro leggermente diversi. Questi sono stati – e restano oggi – molto desiderabili per i musicisti che vogliono combinare ed esplorare una gamma completa di possibilità tonali. Il ’57 Classic Humbucker Vintage Style è il risultato dello sforzo di Gibson di catturare e ricreare questa caratteristica rinomata. Introdotto nel 1992, il Classic ’57 fornisce un suono caldo e pieno con una risposta equilibrata, con quel classico crunch del Gibson humbucker PAF. Sono fatti con le esatte specifiche dei PAFS originali, tra cui magneti Alnico II, espansioni polari nichelate, distanziali in acero, e conduttori intrecciati vintage-style. I pickup sono riempiti di cera per rimuovere tutta laria interna e ogni possibilità di feedback microfonico.
149,00 €Gibson pickup 57 Classic IM57R4P-NZ
149,00 € -
Gibson Premium Soft Case Black ASSFCASE-BLK
Una custodia morbida splendidamente realizzata e ultra resistente , progettata per proteggere quasi allo stesso livello di una custodia rigida! La custodia Gibson Premium Soft è comoda e leggera per un trasporto facile e presenta un interno morbido e soffice per trasportare la chitarra con stile.
149,00 € -
Gibson pickup Burstbucker Type 1 (Double Black,Nickel cover, 2-conductor, Unpotted, Alnico II)
On the shop floor of the original Gibson plant in Kalamazoo, Michigan, the earliest Gibson Patent Applied For humbuckers were wound using imprecise machines, resulting in pickups with varying degrees of output and tone. The Burstbucker™ line of pickups represents Gibson’s drive to recapture the magic of the original Patent Applied For humbucker™ pickups. First introduced in the early 1990s, the Gibson Burstbucker — Types 1, 2, and 3 — successfully captured the subtle variations of true, classic humbucker tone with historically unbalanced coil windings and Alnico 2 magnets. They produce an airy, full tone, and when overdriven, they achieve a magical distortion with the slightly enhanced highs that made the originals famous.
Burstbucker™ Type 1 features a lower output, excellent for the neck position. Burstbucker Type 2 features medium output and is perfect for any position. Burstbucker Type 3 is overwound and hot, which is typically ideal for the bridge position. None of the Burstbuckers are wax potted, and all feature vintage braided two-conductor wiring.
149,00 € -
Gibson pickup Burstbucker Pro (Treble, Double Black,Nickel cover, 2-conductor, Potted,Alnico V) PUBBPTDBNC2
Fatter, meatier tone with more drive and attack. The Burstbucker™ Pro humbucker™ enhances the vintage ”edge” of Gibson’s popular Burstbucker pickups with the added feature of an Alnico 5 magnet. The Burstbucker Pro’s characteristic sweet harmonic complexity and crystalline clarity derive from its slightly unbalanced coil windings. Alnico 5 magnets are used in place of the traditional Alnico 2, yielding a fatter, meatier tone with more drive and attack, providing classic Gibson Patent Applied For tone with a hint of attitude. Wax potting keeps things quiet even with a high-gain rig.
149,00 € -
Gibson pickup 490R Modern Classic 4-Conductor – GH PU490RDBGC4
As rock music developed and grew in popularity, amplifiers became larger and featured higher wattage, and the music became louder and more powerful sounding as a result. This led to a call for a more versatile pickup that could split coils through a push/pull knob and prevent microphonic feedback from occurring when the volume was turned up to maximum levels. Gibson answered this call with the introduction of the revolutionary 490T and 490R pickups (”T” for treble and ”R” for rhythm), which have the traditional characteristics of the original Patent Applied For pickups, but with two key modifications. First, a four-conductor wiring scheme allows the 490s to be connected to any push/pull knob, which lets players split the coils and increase versatility. Gibson also introduced wax potting, which does away with any air space, minimizing microphonic feedback. The 490R is a humbucker with the tonal characteristics of an original Patent Applied For, with a slight increase in upper midrange response. The 490T bridge pickup is calibrated to match the 490R, with pole pieces aligned a little further apart to accommodate the spacing of the strings at the bridge, which is different than the spacing of the strings at the neck.
149,00 € -
Gibson pickup 57 Classic (Double Black, Nickel cover, 2-conductor, Potted, 8k, Alnico 2)
Per i primi anni della loro produzione, i famosi humbuckers Gibson ”Patent Applied For” furono avvolti con macchine imprecise, con conseguente produzione di pickup con uscita e timbro leggermente diversi. Questi sono stati – e restano oggi – molto desiderabili per i musicisti che vogliono combinare ed esplorare una gamma completa di possibilità tonali. Il ’57 Classic Humbucker Vintage Style è il risultato dello sforzo di Gibson di catturare e ricreare questa caratteristica rinomata. Introdotto nel 1992, il Classic ’57 fornisce un suono caldo e pieno con una risposta equilibrata, con quel classico crunch del Gibson humbucker PAF. Sono fatti con le esatte specifiche dei PAFS originali, tra cui magneti Alnico II, espansioni polari nichelate, distanziali in acero, e conduttori intrecciati vintage-style. I pickup sono riempiti di cera per rimuovere tutta l’aria interna e ogni possibilità di feedback microfonico.
149,00 € -
Gibson Premium Soft Case Brown ASSFCASE
Una custodia morbida splendidamente realizzata e ultra resistente , progettata per proteggere quasi allo stesso livello di una custodia rigida! La custodia Gibson Premium Soft è comoda e leggera per un trasporto facile e presenta un interno morbido e soffice per trasportare la chitarra con stile.
149,00 € -
Gibson pickup Burstbucker Type 2 (Double Black,Nickel cover, 2-conductor, Unpotted, Alnico II)
Nell’officina dello stabilimento Gibson originale di Kalamazoo, nel Michigan, i primissimi humbucker Patent Applied For Gibson sono stati avvolti utilizzando macchinari imprecisi, creando dei pickup con diversi livelli di output e suono. La linea di pickup Burstbucker™ rappresenta la spinta di Gibson a riconquistare la magia degli humbucker™ Patent Applied For originali. Introdotto per la prima volta all’inizio degli anni ’90, il Burstbucker di Gibson (Type 1, 2 e 3) è riuscito a catturare le sottili variazioni timbriche del vero suono humbucker classico, con i tradizionali avvolgimenti sbilanciati e magneti Alnico 2. Produce un suono arioso e pieno e, saturato, sprigiona una magica distorsione con quegli alti leggermente più intensi che hanno reso famosi gli originali.
Burstbucker™ Type 1 presenta un output inferiore, eccellente per la posizione al manico. Burstbucker Type 2 presenta un output medio ed è perfetto per entrambe le posizioni. Burstbucker Type 3 è sovravvolto e aggressivo, ideale per la posizione al ponte. Nessuno dei Burstbucker è cerato e tutti sono dotati di cablaggio vintage a due conduttori intrecciati.
149,00 €