Cameo

Ultra-high performance LED PAR 56 with 9 extremely bright 3-Watt TRI colour LEDs in a black housing. This high-performance LED PAR has a beam angle of 25 degrees and a power consumption of just 50 Watts. Like all new LED PAR cans, the CLP 56 TRI 3 WPS features a sturdy housing. The double bracket makes this PAR can the ideal lamp for use as a floor PAR or for mounting to cross-beams and bars. It is actuated either via the DMX protocol (3-pole XLR) with six control channels, in master/slave or standalone mode (sound control, colour change, solid colours). It features an integrated microphone and is quick and easy to operate using four buttons and an LED display. 9 ultra-bright 3-Watt TRI colour LEDs Beam angle of 25 degrees Low power consumption of just 50 Watts Operated via DMX (6 channels), in master/slave mode or standalone mode Simple to operate using the four buttons and LED display Double bracket included as standard Cooling method: Heat sink Sturdy aluminium housing Specifications Product: LED Par Can Type: PAR56 Colour Range: RGB Number of LEDs: 9 LED Type: 3 W TRI Colour Beam Angle: 25° DMX Input: XLR 3-pole DMX Output: XLR 3-pole DMX Mode: 6-channel selectable DMX Functions: RGB, Master Dimmer, Strobe, Sound Control, Colour Jump, Colour Fade Standalone Modes: Static Colour, Colour Change, Colour Fading, Sound Control, Slave Controls: Mode, Value Up, Value Down Indicators: LED Display Power Supply: 100 V AC – 250 V AC Power Consumption: 50 W Power Connector: Schuko Housing Material: Aluminium Housing Colour: Black Dimensions: 270 x 240 x 340 mm

36 x 3 W LED RGB PAR Can in polished housing Extremely high-powered LED PAR in a polished, short housing. Equipped with dual brackets and a filter frame holder. The Cameo CLP64RGB3WPS has a total of 36 ultra-bright 3-watt LEDs (12 x red, 12 x green, 12 x blue) ?” for perfect colour mixing and rich solid colours. The beam angle is 30 degrees. It is operated using three buttons and an LED display on the back. The CLP64RGB3WPS is equipped with a super-quiet fan for cooling. There are three operating modes. In addition to DMX operation with 2, 3, 4 or 6 channels, this LED PAR can also be operated in standalone mode or via sound control. It has a built-in microphone. The CLP64RGB3WPS has a power consumption of just 150 watts, runs on mains voltages of 100 to 250 volts, and thus can be used universally and worldwide. Type: PAR 64 Colour spectrum: RGB Number of LEDs: 36 LED type: 3 W Beam angle: 30° DMX input: XLR 3-pin male DMX output: XLR 3-pin male DMX mode: 4-channel, 6-channel DMX Functions: Colour fade, colour jump, master dimmer, RGB, sound control, strobe Standalone modes: Colour change, colour fade, slave mode, sound control, static colour Controls: Mode, Value Down, Value Up Indicators: LED display Power supply: 100 V AC – 250 V AC Power consumption: 150 W Power connector: Power cord with Schuko connector (Type E / CEE 7/7) Housing material: Aluminium Housing colour: polished Dimensions without mounting bracket Width: 300 mm Height: 275 mm Length: 390 mm